Main Area

The main area is divided into seven sections, 1: Marquee, 2: Keyboard, 3: Roulette table layout, 4: Betting Information, 5: Chip Denomination, 6: Status Bar and 7:Roulette Bot.  A description of each section (identified by a ) is listed below.

1: Marquee

The marquee displays a list of roulette numbers that have recently appeared with the last number appearing at the top.   As each number appears, the previous numbers are pushed down the marquee list.   The placement of the numbers that appear are as follows:  Red numbers appear on the left column, Black numbers appear on the right column and Green numbers (0 and 00) appear in the middle column.   At the top of the marquee is a spin counter that displays the total number of spins that have been processed.

2: Keyboard

The keyboard allows you to enter roulette numbers manually or automatically using a random number generator (RNG).   You can enter numbers using the keyboard three different ways:

Any of the options above will cause the marquee to display the number entered or generated.   The Bankroll indicator located at the bottom of the Spin or Undo buttons keeps a running total of your bankroll for the current session. This indicator is updated whenever bets are placed on the roulette table.  When configured, the Undo button appears when entering manual or auto generating manual numbers.  When the Undo button is clicked, the program reverts back to its previous state.  The total number of times you can perform an Undo operation is set in the Configure view.

3: Roulette table layout

The roulette table contains an image view of all possible layouts.  The table displays either Single zero or Double zero.   This is where you can place bets in any denomination according to the minimum and maximum betting range that is set in the Betting Options view.  The last number that has appeared in the marquee is highlighted on the roulette table.  If the Highlight outside area that matches the last number that has appeared is checked in the Configure view, the outside area (even money, dozens and columns) that references the last number will also be highlighted.

4: Betting Information

This area is a list view of all types of units placed on the roulette table either manually or automatic.   The list view is divided into columns consisting of types of bets, unit amount and what kind of layouts.

5: Chip Denomination

The chip denomination section contains five different chips expressed in units: .5 (1/2 or 50 cents) 1, 5, 25, 100 and 500.  To select a desired chip, move your mouse over the chip and perform a left-click with the mouse button.   The selected chip will become active and will be displayed at the lower right corner of the main view and will remain active until another chip denomination is selected.

To manually place a bet on the roulette table, move your mouse over the table.  As the mouse is moved over the different layout sections, the cursor changes to a hand icon that indicates a valid area to place a bet.  Once you are over your desired layout, perform a left-click with the mouse button.  An chip icon will be displayed over that layout with the active chip.  To increase the value of the chip, continue performing a left-click with the mouse button.  The chip unit will increase by the value of the active chip.  To decrease the value of the chip, perform a right-click with the mouse button.  The chip unit will decrease by the value of the active chip.  When the chip unit value is 0, the chip will be removed from the table.

If you wish to remove a chip with a unit value that is greater than the value of the active chip, perform a CTRL : right-click with the mouse button.   The entire chip will be removed from the table

Chip Unit: This option allows you to manually place a chip unit on the table using your own unit value other than the five standard denominations.  In the chip unit field, enter a value greater than 0.   The active chip will be removed and all chips that are placed on the table will be using the chip unit value.  Restoring the chip unit value to 0, will reactivate the standard chip denominations.

Neighbors: This option allows you to manually add chips to your desired number layout and its neighbors, (numbers that are located next to the desired number on the wheel).  

Manual: This option allows you to remove all manually added chips on the table or repeat the same manually added chips that were used from the previous spin.  

You can automatically have the program repeat the same chips by enabling When placing manual bets, repeat same bets on every spin from the Configure view.

6: Status Bar

The status bar is divided into two sections.

To activate a designed system, select Action > Activate Current System or Ctrl+D.   This acts like a toggle switch to turn on or off a designed system

7: RX Bot

RX Bot is a purchased add-on program that allows the user to use roulette systems with online casinos.  The bot will automatically place chips based on the roulette system or manually place chips from  the user.  The bot can also be use to collect spins from the casinos.  Some supported casinos are:

RX Bot will work in trial mode for 10 minutes while Roulette Xtreme is operating.  Purchase Roulette Bot to unlock the trial mode for unlimited use.

Copyright © 2003 UX Software. All rights reserved